2022 PEDALBOARD WALKTHROUGH | ACS1
“2022 PEDALBOARD WALKTHROUGH”
Here is a rundown/walkthrough of my current 2022 pedalboard!
(Timestamps down below!) ????????
⚡️⚡️⚡️ CLOUD REVERBS ⚡️⚡️⚡️
– https://drive.google.com/file/d/1rErPscE8AAO1bx2MKxkmS6zd5U24JmOW/view?usp=sharing
AMP:
From the L/R outputs of my ACS1, those go straight under my board to the module on my right side of my pedalboard. I then grab two 1/4 instrument cables that go into my stereo DI L/R, which then from the XLR outs then go to the PA system.
(GFI System) Specular Tempus:
– I’m using Michael Pope’s delay presets
Analog Endeavors (AE) controller:
– controller for my bigsky to scroll through reverb presets
POWER:
– The power supply I am using the Strymon Zuma 9-output
INTERFACE/RECORDING:
– I’m using Ableton 10 Live as my DAW. Interfacer is a Focusrite 2i2 3rd Gen
⚡️(If you enjoy my guitar covers, subscribe with the notification bell turned so you never miss a video!)⚡️
♦️[TIME STAMPS]♦️
0:00 Welcome/Intro
0:29 In-Ears
0:43 Amp (ACS1) – IR’S, 2 AMPS, TONE SETTINGS, VOLUME/GAIN, HIGH/LOW FREQUENCIES
3:43 Amp (ACS1) – Sounds
5:21 Pedalboard Signal Chain
6:23 Deep Six Compressor
7:18 Tender Mooer Octaver
8:00 Benson Preamp
9:45 Browne Amplification Protein
13:11 JHS Superbolt V2
14:48 Overdrives (Stacked)
16:24 Walrus Audio Julianna Chorus/Vibrato
18:03 GFI System Specular Tempus (Delay)
19:09 Strymon Big Sky (Reverb)
21:45 Sound Overview of Pedals
27:13 Outro
Contact:
Nathanhernandez270@gmail.com
Instagram:
https://www.instagram.com/_nathanhz/
Guitars:
Gretsch G6112TCB-JR – Jaguar Tan/Copper Metallic (Used in this video)
Fender Stratocaster Custom Body w/ Eric Johnson Pickups
In-Ear Monitors:
JH Audio 13v2
Amp:
Walrus Audio “ACS1” (w/boost always on) – Vox amp on the right side w/ DH’s Greenback IRs (545 3)
and a Fender amp on the left side setting w/ DH’s G10 Vintage IRs (545 3)
Pedalboard:
Walrus Audio Deep Six Compressor V3
Mooer Tender Octaver
Benson Preamp
Browne Amplification protein dual overdrive
JHS Superbolt V2
Walrus Audio Julianna Chorus
GFI System Specular Tempus (Delay)
Strymon BigSky
Walrus Audio ACS1
#worship #guitar #pedalboard #walkthrough
#PEDALBOARD #WALKTHROUGH #ACS1
Originally posted by UCchJ3J_jeDTEC-Nt9S_wxfw at https://www.youtube.com/watch?v=9xjWe5UGKL0
15:04 son of suffering solo? good song
Oh so just like every corny worship player on YouTube. ????
Cool board, have you tried or considered the Tone X pedal? ????
I tried messing with drive order and it doesn't make a whole lot of sense but the Benson first always sounds best.
I love how that was your small reverb. ????
what is better to buy iridium or acs1 ?
Can I ask what version of firmware are you running on your ACS1? My ACS1 barely has any form of breakup at all, and I'm on firmware 2.9.
You ever have issues when playing live that the amp levels on each side are unequal on the ACS1?
I have that sometimes, trying to combat it and fix it.
Would you consider this a wet/dry/wet rig? If so, how do you achieve that?
Will we see a Kernom Ridge on the next walkthrough??
8:15 dies
Just watching this in really '23. Considering your heavy cloud algorithm use. Are you getting a cloud burst?
Hey bro. What is your time in the pre delay of cloud 1,2 and 3?
Definitely building a board like yours!! ❤
Thank you.
Which patch cables do you use for your board bro???
Where’s the hoodie from bro??????
Now THIS is a pedalboard breakdown. Love the attention to detail. Inspired me to throw my Superbolt back on! As a side note, have you tried Hislop's TM IRs yet? Can't find anything with them yet.
do you have a presets for this cloud reverb??its beautiful
Which temple audio board is this ?
Awesome video! Small question are you connecting your board to a focusrite interface?
How can I program the pedal to change the Banks of bigsky?
Hey bro. Can i copy your settings in cloud 1, cloud 2 and cloud 3?
Sir can you show me on how did you do that ambient progressions…very angelic to hear
what is you guitar amp??
where did you place your acs1 in your pedalboard chain??is it in the last or??
Hey Nathan ehx did you not pick the Timeline?
Do you have a video on settings you use on your bigsky?
I was looking to get a pog but the sound of the mooer sold me
sounds amazing man! Just got my acs1. What's your settings on the boost? Only thing you didn't mention in the video is the boost settings. Thanks for your help. Big sky presets are great as well
Bro you got fire tone, my gosh ????
Do you use a dual delay on the tempus or is it just a single delay?
basically 90% worship guitarists out there sound similar to your tone.
Hey Nathan what's boost settings do you use on the ACS1? Nice tone man!!!
Hi Nathan, thanks for giving us the tour.
You inspired me to get a ACS1 recently. But I am realizing that I can't do a mono output with the L(Fender)+R(Vox) configuration. It would require a stereo output.
How do you go about mixing the stereo signal to mono??
Currently, I am using a aby box to mix the two signals into one – but I feel like I am potentially losing out on tone.
Would love to hear your thoughts. DI Box? Active mono sum? Audio interface? Something else?
That’s a really great sounding board!
Hello friend, greetings, I have watched your videos on YouTube, I love your tone, you led me to want to improve my pedalboard . I have a question, because having the space for the JHS red remote on your board you don't use it? you don't see it as useful maybe? I got a Superbolt V2 thanks to you. you convince me.
Quick question. What sample rate and ms Irs do you use for the Acs1? Also what do you mean about the high low frequency stuff. How do u do that?