Saturday, November 9, 2024
BassBass Lessons

Bergantino Announces the Forté HP2X Bass Amp – No Treble


Bergantino Forté HP2X Bass Amp

Bergantino has upgraded its Forté HP bass amp line with the new Forté HP2X, which they say is “back and better than ever.” Central to the redesign is a new custom output transformer.

“In order to best employ a transformer into our current forte’ HP2 design, we worked very closely with the engineers at Cinemag, a highly respected company and large player in the transformer industry,” founder Jim Bergantino explains. “Carefully choosing features such as core material, winding ratios, impedance, inductance, and other tone-enhancing parameters, we were able to come up with a transformer design that uniquely and perfectly fit into the current architecture and circuit topology of our HP2, allowing us to give our new HP2X many of the tonal qualities these transformers have been lauded and sought after for, over decades of use in the musical amplification industry.”

The Bergantino Forté HP2X features a Class D power section and dishes out up to 1,200 watts while weighing just 6.5 pounds. Its controls include a four-band EQ, variable lowpass and highpass filters, Gain, Drive, Punch, Bright, and Mute. Other features include an optional rechargeable Bluetooth footswitch, a front-facing USB port for updating the firmware, and a DI with Pre and Post EQ.

The amp is available now with a street price of $1,759.

Bergantino Forté HP2X Bass Amp Features:

Built-in parallel compression
Drive Circuit: Goes from Soft Clip “purr” to mix shredding distortion
Featuring the new proprietary B.S.D. (Bergantino Smart Drive) technology.
Additional 3dB dynamic head room compared to the original HP
Variable Low-Pass (VLPF) and Variable High-Pass (VHPF) filters, critical
for precise tone shaping and taming of the most challenging gigging
environments
Custom-designed Audio Output Transformer
4-Band Tone Controls: Bass: +/-10db @65hz, Lo-Mid:+/-10db @250hz, HiMid: +/-10db @ 1khz, Treble: +/-10db @ 3.5khz
Bright Switch: Software selectable between 2 khz @ +6db and 7 khz @ +8db
Punch Switch: +4.5 db @100 hz
Auxiliary Input and Headphone Jack: for personal monitor and practice
Bluetooth Foot-Switchable features including Drive, Punch, Bright, and Mute
Software Upgradable via front USB port
Rack Mountable with optional rack ears
Effects send and return loop
Studio quality Direct Output: software selectable Pre or Post EQ
UPS – Universal power supply 115VAC – 240VAC 50/60Hz
Power Section: 600W @ 8 ohms, 1200W RMS @ 4-Ohms, 1200W RMS
@ 2-Ohms
Dimensions: 13.25”W x 8.375”D x 3.75”H
Weight: 6.4 lbs



Originally posted by Kevin Johnson at https://www.notreble.com/buzz/2024/09/06/bergantino-announces-the-forte-hp2x-bass-amp/

Leave a Reply

Your email address will not be published. Required fields are marked *