Custom Build & Custom Order Process: Thinline Telecaster HH 2024 Gold DiMarzio Tone Zone Kluson Icon

Custom Build Order Process begins at the 3:30 mark.
Werner Guitars Website: https://wernerguitars.com/
Reverb shop: Search: “Werner Guitars” https://reverb.com/shop/werner-guitars
Ebay shop: Search: “WernerGuitars” https://www.ebay.com/usr/wernerguitars
Sweetwater Gear Exchange: Search: “Werner Guitars” https://www.sweetwater.com/used/storefront/Werner-Guitars?radius=all

Full-spectrum Resistance 25 ohms to 4 ohms: Guitar has nine (9) distinct resistance settings with mix and match of push-push coil splits. Positions and resistance values are charted below at the very bottom. High-output position number 4 with bridge and neck wired in series. Coil splits are “partial” coil splits modeled after PRS “partial” coil splits to retain oomph, output, and tone.

Switching Positions as Follows:
1. Bridge (Resistance 12.0 ohms)
2. Bridge in parallel with Neck (regular Tele position) (Resistance 6.3 ohms)
3. Neck (Resistance 13.1 ohms)
4. Neck in series with Bridge (Resistance 24.6 ohms)

General Overview:

Gold Sparkle Gloss Thinline Alder Body with Binding
Vintage Yellow Gloss Maple Neck
DiMarzio Tone Zone Dual Rail Humbucker Bridge Pickup 12k
Kluson Icon Twin Blade Humbucker Neck Pickup 13k
Additional position for both pickups in series (Maximum pickup output)
Humbuckers individually (partial) split
Pure Tone Gold Mono output Jack with multi-contact dual tension grounds & dual positive tips for optimal signal, tone & lowest possible noise.
Full level, crown, polish and full set-up by a certified luthier
D’Addario Nickel Wound XL 10-46 EXL110
All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.
Weight of the guitar is 6.8 pounds

Body:

Gold Sparkle Gloss Thinline Alder Body with Binding

Neck:

Vintage Yellow Gloss Maple Neck. 22 medium jumbo frets. 9.5″ radius (1st fret 0.86″, 12th fret 0.97″)
Scale length 25.5″

Hardware:

Gold Wilkinson Bridge with upgraded brass, threaded, compensated saddles and option for top-load
Gold switch tip
Gold output jack ferrule
Gold strap pin buttons
Gold Wilkinson EZ-LOK tuners
Gold neck plate
Gold string ferrules
Gold string tree
Gold mirrored pickguard

Electronics:

DiMarzio Tone Zone Dual Rail Humbucker Bridge Pickup with Gold Cover 12k (Exact measure 12.0 ohms).
Kluson Icon Twin Blade Humbucker Neck Pickup 13k (Exact measure 13.1 ohms).
500K Volume/Tone Potentiometer Push/Pull Audio Taper
Oak Grigsby 4-Way Blade Switch
.022uf 100v Tone Capacitor
Additional position for both pickups in series (Maximum pickup output)
Humbuckers individually (partial) split
Pure Tone Gold Mono output Jack
All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.

(Detailed) Switching Positions as Follows:

1. Bridge (Resistance 12.0 ohms)
with (partial) coil split (tone knob only) 7.9 ohms
with (partial) coil split (tone & volume knob) 4.1 ohms
with (partial) coil split (volume knob only) 5.1 ohms

2. Bridge in parallel with Neck (regular Tele position) (Resistance 6.3 ohms)
with (partial) coil split (tone knob only) 4.9 ohms
with (partial) coil split (tone & volume knob) 4.0 ohms
with (partial) coil split (volume knob only) 4.9 ohms

3. Neck (Resistance 13.1 ohms)
with (partial) coil split (volume knob only) 8.2 ohms

4. Neck in series with Bridge (Resistance 24.6 ohms)
with (partial) coil split (tone knob only) 20.7 ohms
with (partial) coil split (tone & volume knob) 8.5 ohms
with (partial) coil split (volume knob only) 8.5 ohms

Full range of resistance charted:

24.6 ohms
20.7 ohms
13.1 ohms
12.0 ohms
7.9 ohms
8.2 ohms
6.3 ohms
5.1 ohms
4.0 ohms

#Custom #Build #Custom #Order #Process #Thinline #Telecaster #Gold #DiMarzio #Tone #Zone #Kluson #Icon

Originally posted by UCKNNiYN4k4WZUA3n3G4tCJQ at https://www.youtube.com/watch?v=Wiw47sc5y3A